Follow by Email

Friday, October 24, 2014

Mast update

Got the two halfs glued back together. 

The mast is wrapped with 6 oz glass tape When it goes green I'll cut the luff groove slot.
Got all the parts back on the mast.   I made the pin that holds teh spreaders in place.  it's a 5/16 inch bolt witht he head and threads cut off.  I used my angle grinder to make it fit the spreaders.  Drilled holes and used cotter pins so it won't come off.  The mast actually went back into a straight position.  Just has a little twist right at the spreaders.  Nothing to write home about.  I'm satisfied.  


No comments:

Post a Comment